Access Control – de sters

MAC MULTIFUNCTIONAL SYSTEM

ENGLEZA!!!!Sistemul MAC face posibila deschiderea usii folosind aceleasi componente ca si in cazul unei usi normale.
Particularitatea sistemului MAC este ca concentreaza toate functiile de comanda si control in incuietoare, ceea ce simplifica partea electrica in montaj.

Installation on the door…..

The MAC system offers multiple advantages, such as:

• possibility of 12 V AC/DC or 24 V AC/DC power supplies, which avoids problems due to inadequate voltage
• low current absorption:
  • at 12 V the startup current is 500 mA for the first 5-6 sec., before changing to a 250 mA maintenance current
  • at 24 V the startup current is 1 A for 300 millisecond., before settling to 500 mA for 4-5 sec. and finally changing to a 250 mA maintenance current for the remaining 25 sec.
• timer incorporated, time set at 30 sec. with automatic reset (zeroing of the timer) every time the door is opened, eliminating the need for external timers
• red/green LED on the backplate to prevent useless forcing of the handle by signaling whether the opening system is active or not
• continuous handle activation (always open when desired)
• remote LED for remote signaling of lock activation/deactivation

The MAC system comes pre-assembled with the door, including the wiring inside the door leaf and the electrical contacts between the leaf and the frame. Included pre-assembled on the door: anti-panic lock with solenoid and electronic chip with timer incorporated (1), double electrical contacts between leaf and frame (2), internal wiring inside the leaf (3) Included in the package: handle and backplate with red/green LED and connectors (4) Not included: power supply for doorframe contacts (5), opening button and command accessories (6)

Diagram of components

MAC 1 can be combined with any BM type panic bar and M3 emergency handles(to be ordered on the side).

————————————————————-Sfarsit subcapitol

“ELM/MT”, MULTI-VOLTAGE ELECTRIC HANDLE

The MAC 1 system controls access from the pull side of the door. With the lock locked by key, opening is only possible with electrical consent (button, switch, badge reader, etc.) which activates the handle, while opening is always possible from the push side by means of the panic bar or emergency handle. Activation of the handle is signaled by illumination of the “green LED,” while the “red LED” indicates when the handle is idle. Both LEDs are off when no power is being supplied. The illumination of a green LED and sounding of an acoustic signal (buzzer) indicate handle activation, while a red LED indicates deactivation.

When ordered together with the door, the ELM/mt system includes:

electric handle, electrical contacts between the leaf and the frame, power cable inside the door connected to electrical contacts, command panel, lock and fixing screws.

If ordered separately from the door, the system includes: electric handle, command panel and fixing screws.

ELM/CISA MULTI-VOLTAGE CISA ELECTRIC HANDLE

Controlled door opening system that employs an electronic device to activate the handle. Equipped with a separate timer (for insertion into the switch box) which can be set for different opening times: from a minimum of 0,1 second to a maximum of 10 days. Equipped with green LED that signal activation of the handle. The ELM/cisa system includes: electric handles, 2 meters of power cable, cable sleeve for the connection between the leaf and the frame, 8/9 square spindle, fixing screws, adjustable timer packaged separately.

Technical data
power supply	12 Vac/Vdc – 24 Vac/Vdc
current absorbed	330 mA
startup current	800 mA
operational temperature	-20°C ÷ +80°C
max. relative ambient humidity	95%

NOTE The electric handle requires assembly.

 

PANIC BARS FOR COMBINATION WITH  ELM/MT SAU ELM/CISA ELECTRIC HANDLES

The controlled opening direction is from the pull side of the door (electric handle side). Locking the lock by key blocks the electric handle functioning, while opening is still possible via the panic bar on the push side. Use: one- or two-leaved doors for anti-panic exits when access control is desired on the pull side.

Exus

Twist

Slash

EMERGENCY HANDLES FOR COMBINATION WITH ELM/MT OR ELM/CISA ELECTRIC HANDLES

MSC , MSC-X Emergency handles

Use: one- or two-leaved doors when control is desired for one of the two opening directions. Locking with the key blocks opening in both directions.

Controlled opening may be for either the push or pull direction, depending on where the electric handle is applied.

MCC/S, MCC/S-X Emergency handles

Use: for one- or two-leaved doors where access is to be controlled from the pull side only (electric handle side). Locking with the key blocks opening from the push side, but not from the side where the electric handle is applied.

MSC                                                            MCC/S

 EMERGENCY HANDLES FOR COMBINATION WITH ELM/MT ELECTRIC HANDLES

 M3, M3X -Emergency handles 

Use: one- or two-leaved doors for emergency exits when access control is desired on the pull side. The controlled opening direction is from the pull side of the door (electric handle side). Locking the lock by key blocks the operation of the electric handle, while opening remains possible via the M3 emergency handle.

M3                                                            HOT-CIL

 HOT-CIL, HOT-CIL-X Emergency handles

Use: for the doors of hotel rooms The controlled opening direction is from the push side of the door (electric handle side). Closing with the thumbturn latch from inside the room, the opening by electric handle is possible only with an electric consent. Opening is always possible from the room side of the door.

————————————————–Sfarsit subcapitol

ELECTROMAGNETIC SENSOR

……………lipseste capitolul!

————————————————–Sfarsit subcapitol

POWER SUPPLY/COMMAND ACCESSORIES

“Access” code keypad Power supply 12-18 V AC/V DC with 10 numeric buttons plus an Enter key, including control unit for 1 door and timer incorporated (0,5÷25 sec.). Up to 500 recordable different codes, composed from 1 to 6 digits.