Proget – Multipurpose Doors

THE MULTIPURPOSE DOOR IN A CLASS OF ITS OWN

“Indisputable quality”

• Especially sturdy door for safe functioning over time
• Built to order for all kinds of requests
• Fully galvanized door, including the “hidden” parts
• Made of “Sendzimir” processed hot-galvanized sheet metal
• Corrosion protection also provided along cut edges of the metal sheets
• Painted with epoxy-polyester thermoset powders in a 180 degrees (Celsius) oven
• Substantial paint layer (70 microns plus)
• Optimal corrosion resistance demonstrated by 500 hour salt-fog test
• Unaffected by severe climate changes, demonstrated by 2000 hours with +60° to -10° cycles at 75% humidity
• Finishing with high-quality aesthetics
• Orange skin anti-scratch structured paint
• Customizable with wide selection of RAL colors

“Practicality of use”

• Truly sturdy frame that facilitates anchoring to the wall
• Suitable for all types of walls
• Ample size range
• Wide variety of accessories
• Easy installation

“Versatility”

• Very wide field of application
• Can be combined with various frame types
• Installation onto any wall type
• Installation with a block frame possible
• May be ordered with CE marking for external use

“Manufacturing technology”

• Manufacturing in modern and functional facilities which employ the latest technologies to maintain high quality levels and product uniformity
• The entire production process – from raw materials to painted and packaged products – takes place inside Ninz’s own facilities, ensuring a 360 degree door control

Opening direction

Opening direction needs to be indicated while ordering

NOTE: The colors represented in the photos are not standard.
Door closer provided upon request only.

One-leaved door

s
Two-leaved doors

STANDARD ELEMENTS

which comprise Proget multipurpose doors:

Door leaf

• Made of “Sendzimir” processed hot-galvanized sheet metal, press folded and electro welded
• Perimetral rebate on 3 sides, flat at the bottom
• Internally reinforced with hot-galvanized steel profiles
• Heat-insulated treated mineral wool packing that is rigidly joined to the sheet metal
• Internal stiffeners for overhead door closer and panic bar
• Single thickness of 60 mm

Standard frame

• Sturdy profile with a sizeable cross section
• Made of “Sendzimir” processed hot-galvanized sheet metal
• Equipped with special assembly brackets
• Grooves for rebeate sealing
• Standard installation via anchors for mortar fixing
• Upon request installation via expansion or installation screws
• Lower spacer, mounting template
• Rests on finished flooring without rebate
• Strike plates in PA6 black nylon for lock bolt and safety bolts
• Assembly required for doorframes

Hinges

• Nr. 2 three-wing hinges for each leaf
• of which one ball-bearing hinge with screws for vertical adjustment of the leaf, CE marked as per EN 1935, classified for up to 160 kg load, 200.000 cycles durability, suitable for fire door use
• and one hinge with self-closing spring

Safety bolts

• Nr. 1 sturdy safety bolt applied on hinge side leaf edge

Locking mechanism

• Reversible locking mechanism with bolt and central latch
• Insert with patent key, Euro profile cylinder ready

Handle

• Handle in black PA6 nylon with steel core
• Steel installation plate with cylinder hole
• Backplate in black PA6 nylon
• Fastener screws and patent key insert

NOTE: Cylinder and rebate sealing provided on request only.
The handle requires assembly.

INCLUDED ACCESORIES

which comprise Proget multipurpose doors:

Locking mechanism on secondary leaf

• “Flush-bolt” automatic latching of the passive leaf
• Lever control for unlocking

Upper coupling system for the secondary leaf

• Secondary leaf lock activated device which inserts rod into the upper strike box
• Upper strike box in pierced steel with steel roller

Lower coupling system for the secondary leaf

• Vertical rod with steel point which inserts into lower strike box
• Lower floor catch (floor-mounted bushing) made of black nylon with rebate stopper

Identification plate

• Metal tag with door identification data

Standard paint – group 01: 
Leaf color NCS 4020-B50G         Frame color NCS 5020-B50G

Finishing

• Standard painted with epoxy-polyester thermoset powders in a 180 degrees oven, orange skin, anti-scratch finishing
• Standard pastel turquoise color, lighter tone for the leaf (NCS4020-B50G), darker tone for the frame (NCS5020-B50G)

Standard packaging

• Single leaf wrapped into stretchable polyethylene (PE) film
• Single packaging for each doorframe with stretchable polyethylene (PE) film
• Palletized on wooden pallets

Door weight	kg/m2 of wall opening
1 leaf	29
2 leaves	26

NOTE: If the door ever needs to be repainted, follow the precise instructions on the „painting“ page.

OPTIONAL ACCESORIES

A wide variety of accessories and surface fi nishes are available on request for maximum value enhancement of Proget doors to your own specific needs.

The proper accessories can help resolve:

Safety-related needs

• Doors for panic exits (see panic bars)
• Doors for emergency exits (see emergency exit handles)
• Three-point locking mechanism

Installation and utilization needs

• Special frames
• Frame extensions
• Floor-mounted fl oor catch in galvanized steel
• Drip steel-profi le
• Special installation screws
• Kick and protection plates
• Rectangular windows, standard or built to order
• Round windows
• Wide variety of grates

Access-related control issues

• Electrically-activated lock mechanisms
• Electric handle mechanisms
• Magnetic blocking mechanisms

Performance enhancing

• Sealing
• Cylinders
• Door closers
• Special handles

Customized finishing

• Select paint colors from a wide variety of RAL tints
• NDD – Ninz Digital Decor, graphic images applied with special ink jets and protected by a transparent topcoat. Infinite varieties of customizable decorations in harmony with specific door settings
• Stainless steel handles
• Colored handles

Packaging for maximum protection

• Sturdy wooden crates protect all doors and related accessories
• NDD decorated doors
• Construction sites
• Shipping abroad
• Special transport

NOTE: Details on the optional accessories may be found in the following chapters of this website:

• Finishing
• Accessories for metal doors
• Panic exit devices

 

 

SPECIFIC OPTIONAL ACCESSORIES – WINDOWS

Projet Multipurpose Doors

MULTIPURPOSE WINDOW WITH METAL WINDOW FRAME

Upon request one- and two-leaved doors may be equipped with round or rectangular windows, with different types of glass and window frames.

Production limits

Window sizes are standard and the minimum border strips around the window may not be reduced.

Borders, window position

“Border measurement” refers to the distance from the edge of the window to the wall opening of the door.

NOTE:  Position and measurements indicated above are for standard.
Different positions may be considered as long as they respect the minimum “a” and “b” border strips. The window itself may not be supplied separately except for replacements. It is always advisable for doors with windows to be equipped with door closers for controlled closing.

MULTIPURPOSE WINDOW WITH RUBBER WINDOW FRAME

On request, one- and two-leaved doors may be equipped with round or rectangular windows, with laminated 3 + 3 mm glass framed with a black rubber EPDM profile. The corners of rectangular windows are rounded (radius of approx. 100 mm).

Production limits

Window sizes are standard and the minimum border strips around the window may not be reduced.

Borders, window position

“Border measurement” refers to the distance from the edge of the window to the wall opening of the door.

NOTE: Position and measurements indicated above are for standard.
Different positions may be considered as long as they respect the minimum “a” and “b” border strips. The window itself may not be supplied separately except for replacements. It is always advisable for doors with windows to be equipped with door closers for controlled closing.

VENTILATING LOUVERS/GRATES WITH METAL FRAMES

To permit continuous air movement through the door, different types of ventilating louvers are available upon request in standard or non-standard formats. The screw-on metal frames for the ventilating louvers are painted the same color as the leaf using thermoset epoxy-polyester powders. On request air flow estimates calculated by a special program can be supplied for the dimensions of the ventilating louvers.The vertical vertical position of the louvers needs to be indicated on the order.

Louver with steel grate plates

Louver with steel grate plates only. Standard production employs angled steel grate plates that slope downwards in the same direction as the door pull. Standard 200 mm elevation above the fi nished floor.

Dimensions L x H	estimated air flow
300 x 400	500 cm2
400 x 600	1100 cm2
400 x 1200	2500 cm2
to order	by request

Louver with steel grate plates and anti-rodent mesh

Steel grate with steel grate plates overlaid with a metal antirodent mesh (11 x 11 x 1 mm sheet). Standard production employs angled steel grate plates that slope downwards in the same direction as the door pull. Standard 200 mm elevation above the fi nished floor.

Dimensions L x H	estimated air flow
300 x 400	400 cm2
400 x 600	900 cm2
400 x 1200	2000 cm2
to order	by request

Louver with steel grate plates and anti-insect mesh

Louver with steel grate plates overlaid with a metal anti-insect mesh (5 x 5 x 0,5 mm sheet). Standard production employs angled steel grate plates that slope downwards in the same direction as the door pull. Standard 200mm elevation above the finished floor.

Dimensions L x H	estimated air flow
300 x 400	400 cm2
400 x 600	800 cm2
400 x 1200	2000 cm2
to order	by request

Anti-rodent mesh

Metal frame with metal anti-rodent mesh only (16 x 16 x 3 mm sheet). Standard 200 mm height above the fi nished floor.

Dimensions L x H
300 x 400
400 x 600
400 x 1200
to order

VENTILATION LOUVER/GRATE

Ventilation louver made of either black or white PVC, 482 x 99 mm (air passage approx. 150 cm2). The opening direction of the door needs to be specified.

FRAME EXTENSIONS FOR PROGET MULTIPURPOSE DOORS

IM 1

Frame extensions to be mounted in addition to the Proget frame acting as a wall cladding. Made of „Sendzimir“ processed hot-galvanized sheet metal and painted the same color as the doorframe with epoxy-polyester powders. Profile on three sides, upper corners with 45 degree joint, fixing with screws and plugs in groove (screws and plugs not included).

IM 3

Frame extensions to be mounted in addition to the Proget acting as a wall cladding, especially for plasterboard. Made of “Sendzimir” processed hot-galvanized sheet metal and painted the same color as the doorframe with epoxy-polyester powders. Profile on three sides, upper corners with 45 degree joint, fixing with screws and plugs (screws and plugs not included).

IM 4

Frame extension to be screwed to the Proget doorframe acting as a wall cladding. Made of “Sendzimir” processed hot-galvanized sheet metal painted the same color as the doorframe with epoxy-polyester powders. Profile on three sides, upper corners with 90 degree joint. Complete with fastener screws. To mount the frame extension, fixing holes need to be drilled into doorframe on site. Combine with sealing to conceal the screw heads.

IM 5

Telescopic frame extension to be screwed to the Proget doorframe acting as a wall cladding for expansion screw
fixing. Consists of two overlapping profiles with a 25mm adjustable range. Made of “Sendzimir” processed hot-galvanized
sheet metal painted the same color as the doorframe with epoxy-polyester powders. Profile on three sides, upper corners with 90 degree joint. Complete with fastener screws. To mount the frame extension pre-drilled holes are available on the frame. Combine with sealing to conceal the screw heads.

SPECIAL FRAMES FOR PROGET MULTIPURPOSE DOORS

Embracing three sided frame for Proget multipurpose doors with 45 degree corner joints, made of 1,25 mm thick “Sendzimir” processed galvanized steel sheets. To be screwed to finished walls, including joints for assembly, hole-covering caps, sealing and RAL painting with thermoset epoxy-polyester powder paints. Pre-drilled screw holes present on the doorframe.

Installation screws not included.

Order measurements	required wall opening	doorframe opening
FM L (width)	FM L	FM L – 80 mm
FM H (height)	FM H	FM H– 40 mm

BLOCK FRAME FOR IN THE REVEAL (TUNNEL) APPLICATIONS

 

Three sided block frame application of Proget multipurpose doors with 45 degrees corner joints, made of 1,25 mm thick “Sendzimir” processed galvanized steel sheets. To be screwed to finished walls and equipped with 6 integrated attachment shackles. Includes assembly joints, hole-covering caps, sealing and RAL painting with thermoset epoxy-polyester powder paints. Pre-drilled screw holes present on the doorframe.

Installation screws not included.

Order measurements	required wall opening	doorframe opening
FM L (width)	FM L + 70 mm	FM L – 80 mm
FM H (height)	FM H + 35 mm	FM H– 40 mm

THREE-POINT LOCKING MECHANISM

Upon request for a more reliable closure, one and twoleaved Proget multipurpose doors may be delivered with a three-point lateral lock. In combination with double M1 handle and cylinder. The lock is also available for antipanic
and emergency push versions. Thus the three-point locking mechanism can be combined with emergency handles or with EXUS, TWIST, SLASH type BM panic bars in conformity with CE marking.

STEEL FLOOR CATCH

Floor-mounted steel floor catch for two-leaved Proget doors. Made of pierced and successively galvanized steel. Includes rebate stop for the passive leaf, the strike box for insertion of the rod, Nr. 3 screws and Nr. 3 plugs.

To be used in place of the nylon floor catch for doors that usually remain open and where carts and heavy equipment pass on a regular basis.

FF REBATE SEALING

FF sealing in black extruded profile to be pressed into the
dedicated groove in the perimetral frame and on the central
joint of two-leaved doors.

NOTE: Upon request sealing supplied for single one-leaved or two-leaved doors to be cut and mounted on site

THRESHOLD

Fixed threshold in anodized aluminium supplied with relative rebate sealing. To be installed for single and double leaved doors onto the floor with screws and plugs (not supplied).

NOTE
This devices is delivered only when the door has been ordered with CE conformity for external use.
For the installation it is necessary to adapt the threshold to the frame of the door and to drill a hole for its fixing. Further it is necessary to finish up the threshold with silicone.

Door cross sections – Measurements

One-leaved doors
Horizontal cross section

Doors without lower threshold
Vertical cross section

Leaf thicknesses
MULTIPURPOSE	60 mm

NOTE:
The tolerances FM L +10/+20, FM H +5/+15 of the indicated measurements make it easier to fill the gap between the wall and the doorframe with cement mortar.
For dry wall installation, the holes must be precise and greater tolerance ranges should not be employed.

Installation methods

Installation with anchors for mortar fixing

Standard installation method for Proget doors is with anchors for mortar fixing. Appropriate cuts for the anchors will need to be created in the walls (section 80 x 200 mm) or fixed with plugs. For fixing with screws the anchors should be used as spacers and fixed with expansion screws. For a perfect mechanical fit, the space between the doorframe and the masonry shall always be filled with concrete mortar or polyurethane foam; the filling with polyurethane foam is mandatory in case of external use with CE marking.

One-leaved doors
FM L = from 500 to 1340 x FM H = from 800 to 1749

FM L = from 500 to 1035 x FM H = from 1750 to 2200

FM L greater than 1036 and/or FM H greater than 2200

NOTE:
For proper installation, the cuts for the anchors should be 80 x 200 mm in size.

Two-leaved doors
FM L = from 850 to 2660 x FM H = from 800 to 1749

FM L = from 850 to 2070 x FM H = from 1750 to 2200

FM L greater than 2070 and/or FM H greater than 2200

INSTALLATION FOR EXPANSION SCREWS FIXING

Upon request, the Proget doors can be supplied with pre-drilled holes for the installation with expansion/wall screws. In this case, the doorframe will be supplied without anchors. For a perfect mechanical fit, the space between the doorframe and the masonry shall always be filled with concrete mortar or polyurethane foam; the filling with polyurethane foam is mandatory in case of external use with CE marking.

WALL SCREWS

For direct wall installations or installation onto subframes, special expansion screws should be used without plugs. Please see the “accessories” pages for more details.

Order measurements – Handle height

Wall opening and Doorframe Opening

In the reveal apllication opening

One-leaved doors Opening L = FM L + 70 Opening H = FM H + 35 Two-leaved doors Opening L = FM L + 70 Opening H = FM H + 35

HANDLE HEIGHT

One-leaved door
h = 1050 (FM H ≥ 1750)

Two-leaved door
h = 1050 (FM H ≥ 1750)

Opening measurements – Overall dimensions

OPENING MEASUREMENTS AND OVERALL DIMENSIONS WITH 90 DEGREE OPENING

One-leaved doors with panic bar

Two-leaved doors with panic bars

OVERALL DIMENSIONS WITH 180 DEGREE OPENING

One-leaved doors
x = FML – 7

Two-leaved doors
x = L1 + 1, y = L2 + 42, b = 130