Electric Handles - Ninz Doors

“ELM/MT”, MULTI-VOLTAGE ELECTRIC HANDLE

The MAC 1 system controls access from the pull side of the door. With the lock locked by key, opening is only possible with electrical consent (button, switch, badge reader, etc.) which activates the handle, while opening is always possible from the push side by means of the panic bar or emergency handle. Activation of the handle is signaled by illumination of the “green LED,” while the “red LED” indicates when the handle is idle. Both LEDs are off when no power is being supplied. The illumination of a green LED and sounding of an acoustic signal (buzzer) indicate handle activation, while a red LED indicates deactivation.

When ordered together with the door, the “ELM/MT” system includes:

electric handle, electrical contacts between the leaf and the frame, power cable inside the door connected to electrical contacts, command panel, lock and fixing screws.

If ordered separately from the door, the system includes: electric handle, command panel and fixing screws.

Technical data
power supply	12 Vac/Vdc – 24 Vac/Vdc
current absorbed at 12 V	500 mA
current absorbed at 24 V	200 mA
startup current at 12 V	700 mA
startup current at 24 V	300 mA

“ELM/CISA”, MULTI-VOLTAGE CISA ELECTRIC HANDLE

Controlled door opening system that employs an electronic device to activate the handle. Equipped with a separate timer (for insertion into the switch box) which can be set for different opening times: from a minimum of 0,1 second to a maximum of 10 days. Equipped with green LED that signal activation of the handle. The ELM/cisa system includes: electric handles, 2 meters of power cable, cable sleeve for the connection between the leaf and the frame, 8/9 square spindle, fixing screws, adjustable timer packaged separately.

Technical data
power supply	12 Vac/Vdc – 24 Vac/Vdc
current absorbed	330 mA
startup current	800 mA
operational temperature	-20°C ÷ +80°C
max. relative ambient humidity	95%

NOTE: The electric handle requires assembly.

PANIC BARS FOR COMBINATION WITH “ELM/MT” OR “ELM/CISA” ELECTRIC HANDLES

The controlled opening direction is from the pull side of the door (electric handle side). Locking the lock by key blocks the electric handle functioning, while opening is still possible via the panic bar on the push side. Use: one- or two-leaved doors for anti-panic exits when access control is desired on the pull side.

Exus

Twist

Slash

EMERGENCY HANDLES FOR COMBINATION WITH “ELM/MT” OR “ELM/CISA” ELECTRIC HANDLES

MSC , MSC-X Emergency handles

Use: one- or two-leaved doors when control is desired for one of the two opening directions. Locking with the key blocks opening in both directions.

Controlled opening may be for either the push or pull direction, depending on where the electric handle is applied.

MCC/S, MCC/S-X Emergency handles

Use: for one- or two-leaved doors where access is to be controlled from the pull side only (electric handle side). Locking with the key blocks opening from the push side, but not from the side where the electric handle is applied.

MSC MCC/S

EMERGENCY HANDLES FOR COMBINATION WITH “ELM/MT” ELECTRIC HANDLES

M3, M3X -Emergency handles

Use: one- or two-leaved doors for emergency exits when access control is desired on the pull side. The controlled opening direction is from the pull side of the door (electric handle side). Locking the lock by key blocks the operation of the electric handle, while opening remains possible via the M3 emergency handle.

M3 HOT-CIL

HOT-CIL, HOT-CIL-X Emergency handles

Use: for the doors of hotel rooms The controlled opening direction is from the push side of the door (electric handle side). Closing with the thumbturn latch from inside the room, the opening by electric handle is possible only with an electric consent. Opening is always possible from the room side of the door.