DOOR BLOCKING ELECTROMAGNET “13700 TD”
This system is for use in special situations when the doors remain closed and should only be opened with electrical consent. The electrically powered electromagnet holds the door closed with a holding force of approximately 300 kg, rendering the action of the handle ineffective. Only electrical commands (badge reader, key button, etc.) or electrical consent from the fire detector system can deactivate the electromagnet making a door opening possible.
Operation mode
The door is held closed by the electromagnet (01) and the bolt of the lock. Opening from the outside can happen via magnetic card (04) using the Badge reader (02) of the card control system or any other system of choice and by retracting the bolt using the handle or key. From the inside, the deactivation of the electromagnet is caused by the unlock button (03) (also remotely) or with the same system used for the pull side, while the locking bolt must still be retracted using the handle or key. The activated electromagnet signals its state with a red LED, whereas the green LED signals the temporary deactivation. Further a relay AC/DC signaling the electromagnetic state is supplied.
NOTE :Unlocking of the door is only possible if the door is not locked by key.
| Technical data | |||
|---|---|---|---|
| model | 13700 TD | withstand force | fino a 300 Kg. |
| power supply | 12/24 Vdc | time delay | 0 ÷ 90 sec. |
| current absorbed at 12 V | 500 mA | electrom. compatib standard | EMC – UNI CEI 70011 |
| current absorbed at 24 V | 250 mA | certificate Nr. | 0123/02 |
COMPONENTS INCLUDED WITH THE ELECTROMAGNET CONTROLLED OPENING SYSTEM
For Proget doors
Electromagnet 13700 TD holding force 300 kg, 12/24 V DC, fastener plate, anchor with stainless steel fastener backplate.
For Rever/Univer doors
Electromagnet 13700 TD withstanding force 300 kg, 12/24 V DC, fastener plate and angle bar, anchor with stainless steel fastener backplate.
Control system:
- “Access” code keypad
- Card-based control system
- Biometric “TOCA access” reader
- Unlock button
NOTE :
Detailed specifications for the Control system are found on the “Command accessories” page.
PROGET Electromagnet REVER/ UNIVER Electromagnet